PRO CARE POLISH REMOVER is a water-based stripper formulated to remove old layers of polish and wax from floors prior to re-sealing. This product is safe and easy to use.

DILUTION:

High strength Use the product neat for removal of old and thick wax or polish build ups. Fast track applications.

Medium strength 1 part PRO CARE POLISH REMOVER to 6 parts water for annual stripping and thin build up.

PRODUCT APPLICATION:

• Prepare the surface by sweeping, vacuuming, or dusting. Mask off any adjacent surfaces that need to be protected.
• Mix the correct dilution and apply using a mop or sponge.
• Leave the solution to soak for 5 min to begin loosening the wax or polish.
• Scrub difficult to remove areas, taking care not to damage the tiles.
• Mop up excess solution, thoroughly rinse with clean fresh water and allow to dry.
• Inspect the surface after it has dried. Repeat if necessary

PRECAUTIONS & LIMITATIONS:

a. Ensure that the above instructions are adhered to at all times and do not adulterate the product in any way as this could cause failure.
b. Rubber gloves should be used when applying PRO CARE POLISH REMOVER. In the event of contamination, rinse skin under cold water. Consult a doctor if irritation persists.
c. Keep PRO CARE POLISH REMOVER away from pets and children.
d. Do not ingest.